To confirm that a chemical sample meets your requirements, you need to compare the supplier’s Certificate of Analysis against your agreed specification, then verify critical parameters through independent laboratory testing. The CoA alone is not sufficient; physical testing by a qualified lab provides the objective confirmation that sourcing professionals and quality teams need before approving a new supplier or batch. The sections below address the most common questions around chemical sample evaluation, from testing methods to approval documentation.
What tests confirm a chemical sample matches its specification?
A chemical sample is confirmed against its specification through a combination of identity testing, purity analysis, and physical property measurement. The exact tests depend on the chemical in question, but the core objective is always the same: generate quantitative data that can be directly compared to the agreed specification limits.
Common analytical methods used in chemical sample testing include:
- Gas Chromatography (GC) or High-Performance Liquid Chromatography (HPLC) for purity and assay determination
- Infrared Spectroscopy (FTIR or ATR-FTIR) for chemical identity confirmation
- Inductively Coupled Plasma (ICP) analysis for trace metal content
- Karl Fischer titration for moisture and water content
- Density and viscosity measurement for physical property verification
- pH and acidity/alkalinity testing where relevant to the application
- Colour measurement using the APHA or Hazen scale for solvents and clear liquids
The specification itself should define which tests are mandatory and what the acceptable range is for each parameter. If your specification does not yet exist in a formal document, developing one before sampling begins will save significant time and prevent disputes during the approval process.
What documents should a supplier provide with a chemical sample?
A supplier should provide, at minimum, a Certificate of Analysis, a Safety Data Sheet, and a technical data sheet alongside any chemical sample. These three documents together allow you to verify identity, assess compliance with your specification, and understand handling and hazard requirements before testing begins.
Depending on the chemical and your end-use requirements, additional documentation may also be necessary:
- Certificate of Analysis (CoA): Batch-specific test results from the manufacturer, referencing the lot or batch number that matches the sample
- Safety Data Sheet (SDS): Hazard, handling, storage, and regulatory information in compliance with GHS or regional standards (REACH in the EU, for example)
- Technical Data Sheet (TDS): Product properties, recommended uses, and storage conditions
- Country of origin documentation: Relevant for customs, duty calculations, and trade compliance
- Regulatory compliance declarations: REACH registration, RoHS compliance, food-grade or pharmaceutical-grade certifications where applicable
- Manufacturing site details: Name and location of the producing plant, which allows for independent audit if required
A supplier who is reluctant to provide any of these documents warrants caution. Transparency in documentation is a baseline indicator of supplier reliability.
How do you verify a supplier’s CoA is accurate and not falsified?
You verify a supplier’s Certificate of Analysis by cross-referencing its data against your own independent laboratory test results from the same sample. If the numbers align within normal analytical tolerance, the CoA is credible. Significant discrepancies between the CoA and your lab results are a strong indicator of falsification or, at minimum, poor quality control at the supplier’s facility.
Beyond direct comparison, several additional checks help assess CoA authenticity:
- Check for batch number consistency: The lot or batch number on the CoA must match the label on the sample container. Mismatches suggest the document was not generated for the specific sample received.
- Look for suspiciously round numbers: Genuine analytical results rarely land on perfectly round figures. A CoA showing exactly 99.00% purity across every batch deserves scrutiny.
- Request the original manufacturer’s CoA: When buying through a distributor or trading company, ask for the CoA issued by the producing plant, not just the distributor’s reissued version.
- Verify the issuing laboratory: If the CoA references a third-party lab, confirm that lab exists and is accredited. Some falsified CoAs cite laboratories that do not exist or are not accredited for the methods listed.
- Commission a supplier audit: For high-value or critical chemicals, an on-site audit of the supplier’s quality management system and laboratory provides the deepest level of verification.
When should you use a third-party lab for chemical sample testing?
You should use a third-party laboratory for chemical sample testing whenever you are approving a new supplier, introducing a new chemical into your supply chain, or when the supplier’s CoA results conflict with your in-house measurements. Third-party testing provides an independent, legally defensible record that neither the buyer nor the supplier can be accused of manipulating.
Specific situations that warrant third-party chemical sample testing include:
- Initial supplier qualification, where no prior testing history exists
- High-value or high-risk chemicals where specification failure would cause significant financial or safety consequences
- Regulatory submissions that require accredited test data (ISO 17025-accredited labs are typically required)
- Dispute resolution between buyer and supplier over whether a delivered batch meets specification
- Periodic re-qualification of established suppliers to confirm ongoing consistency
- Chemicals sourced from unfamiliar regions or new manufacturing sites
When selecting a third-party lab, confirm that it holds ISO 17025 accreditation for the specific test methods you require. Accreditation scope varies by lab, and a lab accredited for one method is not automatically qualified for another.
What are the most common reasons a chemical sample fails approval?
The most common reasons a chemical sample fails approval are purity below specification, excess moisture or water content, incorrect physical properties such as density or viscosity, and unacceptable levels of trace impurities or heavy metals. In many cases, failure reflects a genuine manufacturing quality issue rather than deliberate misrepresentation.
Understanding the root cause of a failure is as important as the failure result itself:
- Purity shortfall: Often caused by incomplete reaction, inadequate distillation, or blending with off-spec material. This is the most frequently cited failure reason in chemical quality control processes.
- Moisture content out of range: Common in hygroscopic chemicals that have been stored or transported without adequate moisture protection.
- Colour outside specification: Can indicate degradation, contamination, or the presence of reaction byproducts.
- Heavy metal contamination: Particularly relevant for chemicals used in food, pharmaceutical, or electronic applications, where trace metal limits are tightly controlled.
- Wrong isomer or grade: The sample is chemically related to what was ordered but is not the correct form, for example, a different isomer or a technical grade instead of a pharmaceutical grade.
- Packaging or container contamination: The chemical itself may be within specification at the point of production but becomes contaminated during filling, storage, or transit.
When a sample fails, document the specific out-of-specification parameters and share the data with the supplier. A professional supplier will investigate the root cause and either submit a corrected sample or explain the corrective action taken.
How do you document and communicate a sample approval decision?
A sample approval decision should be documented in a formal sample approval report that records the sample reference, the specification used, the test results obtained, the comparison outcome, and a clear pass or fail decision. This report becomes part of the supplier qualification record and should be retained for as long as that supplier remains active.
Effective documentation of the sample approval process typically includes:
- Sample receipt record: Date received, supplier name, batch or lot number, quantity, and condition of packaging on arrival
- Specification reference: The exact version of the specification document used for evaluation, to prevent ambiguity if the specification is later revised
- Test results summary: All parameters tested, the method used, the result obtained, and the specification limit for each parameter
- CoA comparison: A side-by-side comparison of supplier-declared values and independently measured values
- Decision and rationale: A clear approved, conditionally approved, or rejected status, with reasoning for any conditional decisions
- Authorisation: Name and role of the person responsible for the approval decision
Communicate the decision to the supplier in writing, referencing the batch number and your internal sample reference. For rejections, include the specific out-of-specification results and, where possible, guidance on what a resubmitted sample must achieve. Clear written communication protects both parties and accelerates the resolution process.
How KEMITO supports your chemical sample approval process
For sourcing agents and trading company professionals managing multiple supplier relationships, the sample approval process can quickly become a bottleneck. KEMITO’s chemical sourcing service is designed to take that burden off your team by handling the end-to-end supplier identification, sample coordination, and approval workflow on your behalf.
- Identifying and pre-screening suppliers against your product requirements and quality standards
- Coordinating sample requests, shipping, and documentation collection from suppliers across EMEA and worldwide
- Managing specification development and CoA verification as part of the supplier approval process
- Supporting compliance with relevant chemical regulations, including REACH and customs requirements
- Scaling from a single spot delivery to a fully outsourced procurement solution as your needs grow
Whether you are qualifying a new chemical supplier or streamlining an existing sourcing workflow, KEMITO provides the expertise and infrastructure to make the process faster and more reliable. Contact our team to discuss your chemical sourcing and sample approval requirements.
Related Articles
- What documentation should accompany a chemical purchase order?
- What should procurement teams check before accepting a chemical quotation?
- How does low-emission fleet management work for chemical carriers?
- How does road transport of hazardous chemicals work?
- What is ADR certification and why does it matter?
